IEC 62108 High Pressure Accelerated Aging Environment Test Chamber

This high-pressure accelerated aging environment test chamber complies with GB/T 29309-2012 and IEC62108 standards, designed for rigorous testing applications in industrial and research settings.

• Dual-circuit structure with imported high-temperature solenoid valve minimizes failure rates
• Separate steam generation room prevents direct steam impact on test samples
• Ergonomic door lock design for easy operation
• Advanced pressure stability and reproducibility through pre-test cold air and test-time emptying design
• Extended operation capability up to 400 hours continuous testing
• Water level protection with integrated sensor technology
• Pressure-resistant tank design withstands 2.65kg at 140℃ (meets 6kg water pressure test)
• Two-stage pressure safety protection with combined controller and mechanical systems
• Emergency safety push button with two-stage automatic activation

• PM1-air compressor: Provides air source when energized
• FRL1-Air source triple piece: Filters and decompresses air source
• SV1-intake valve: Activates when pressure deviation is below set value
• SV2-Exhaust valve: Activates when pressure deviation exceeds set value
• SV3-Exhaust valve: Normally open type for test sample protection
• TV1, TV2-flow control valve: Manual inlet and exhaust flow adjustment
• PS1-pressure transmitter: Measures absolute pressure in chamber
• BP1-pressure relay: Detects chamber pressure and activates safety protocols
• PG1-pointer pressure gauge: Reference gauge pressure measurement
• RV1-Safety valve: Normally closed, opens during over-pressure conditions
• HV1-hand valve: Manual exhaust control

• Japanese-made RKC microcomputer controls saturated steam temperature (PT-100 platinum temperature sensor)
• LED display time controller
• Pointer pressure gauge display

• Round inner box with stainless steel construction meeting industrial safety container standards
• Patented packing design for superior door-to-box integration
• Critical point LIMIT mode automatic safety protection with fault indicator display

• Imported high-temperature sealed solenoid valve with dual-loop structure prevents pressure leakage
• Comprehensive protection: over-pressure, over-temperature, one-key pressure relief, manual pressure relief
• Back pressure door lock prevents opening when chamber is pressurized

• 1 set of test racks
• Sample tray
• Power supply: Single-phase 220V 20A 50/60Hz (±10% fluctuation allowed)
• Working environment: 5℃~30℃
• Experimental water: Pure water or distilled water