Product Description:
The vulcanizer is a kind of advanced rubber product hot press molding equipment, suitable for the production of complex shapes, difficult to vent and other difficult to mold rubber products and the use of rubber products that are prone to bubble formation.
It has the characteristics of timing mold locking, automatic pressure compensation, automatic temperature control, automatic timing, the surface temperature of the hot plate is uniform, the temperature control is accurate and intuitive, the pressure holding is stable and reliable, and the operation is safe and convenient.
ZL-3022C 150Ton Laboratory Plastic Silicone Vulcan...
Structure And Principle
The main engine is composed of four parts: the machine body, the oil pump, the control valve, and the electrical control.
1. The fuselage parts are composed of upper frame, lower frame, fuel tank, heating plate, oil cylinder, plunger, etc. The four uprights bear 25T tension and double as guide rails for heating plate lifting.
2. Oil pump components: use the hydraulic oil pump imported from Taiwan to supply oil to the oil cylinder through the one-way valve control valve.
3. The control valve component is composed of an automatic drain valve installed on the hydraulic station and a shock-resistant electric contact pressure gauge, which controls the rise and fall of the hot plate and other actions.
Technical Parameters:
| 1. Capacity | 150T (Can be customized) |
| 2. Temperature range | normal temperature～300℃ |
| 3. Temperature controller | microcomputer high-precision LED display, key setting input, numerical display |
| 4. Timer | LED display, time range 0.1S～99min～9.9hr |
| 5. Temperature control method | P.I.D method microcomputer control performance is stable, and temperature control is accurate. |
| 6. Heater | built-in cylindrical heating mold, scientifically coordinated holes, fast temperature generation, long life, easy maintenance |
| 7. Heating time | about 15min at room temperature～170℃ |
| 8. Hot pressing plate | 450×450mm high temperature resistant steel plate, the surface is carbonized and quenched, the heat conduction is fast, the pressure is parallel and unchanged |
| 9. Cooling temperature range | normal temperature～350℃ |
| 10. Oil pressure system | hydraulic flow closed loop control system, with automatic pressure compensation function. The time of the first pressurization and the second pressurization and the third pressurization can be preset, the load is strong, and the lifting is stable; automatic pressurization, pressure maintenance, Relieve pressure. |
| 11. Oil cylinder stroke | Max 200mm |
| 12. Oil cylinder speed | 8mm/s |
