HR-150A Hardness Tester Metal Hardness Tester Heat Treatment Hardness Tester
HR-150A manual Rockwell hardness tester is a mechanical manual test, a popular Rockwell hardness tester without electrical devices. It has the characteristics of good economy and practicability, wide application range and easy operation.
Scope of application:
Quenched steel, quenched and tempered, annealed steel, chilled castings, malleable castings, aluminum alloys, copper, bearing steel, etc.
HRM-45 manual surface Rockwell hardness tester is a popular Rockwell hardness tester specially used to test the surface hardness of metal materials. This machine adopts mechanical manual loading operation, no electrical device. It has the characteristics of easy operation, small indentation and high precision.
Scope of application:
Surface hardened steel, copper, aluminum alloy sheet, strip steel, hard alloy steel, galvanized, chrome-plated, tin-plated, material surface heat treatment and chemical surface treatment of various metal materials.
| Model | HR－150A Manual Rockwell | HRM－45 Manual Superficial Rockwell |
| Rockwell Scales | HRA, HRB, HRC, HRD, HRE, HRF,HRG,HRH,HRK | HR15N,R30N,HR56N,HR15T,HR30T,HR45T |
| Initial Testing Force | 10Kgf(98.07N) | 3Kgf(29.42N) |
| All Testing Force | 60Kgf (588N), 100Kgf (980N), 150Kgf (1471N) | 15Kgf (147.1N), 30Kgf (294.2N), 45Kgf (441.3N) |
| Indication of Hardness Value | Dial |
| Duration Time | optional |
| Max Height of Specimen | 200mm |
| Max Width of Specimen | 165mm (The distance from the fuselage to the center of the indenter) |
| Dim ension(DxWxH) | 520X215X700(mm) |
| Net Weight | 65Kg | 65Kg |
| Standard Accessories | 3 Standard Rockwell hardness block | 3 Standard Superficial Rockwell hardness block |
| Diamond Rockwell Hardness Indenter,Diameter1.5875mm Ball Indenter. One for each Tasting Table(big,medium,"V").One for each 3 pcs Weight(a,b,c) |
| Optional Accessories | Diameter3.175mm,Steel Ball Indenter |
How do you use a manual Rookwell hardness tester?
(1) Wipe the top surface of the screw and the upper and lower end surfaces of the worktable, and place the worktable on the screw table;
(2) Clean the support surface of the specimen and place it on the workbench, rotate the handwheel to slowly raise the workbench and push up the indenter until the small pointer points to the red dot and the big pointer rotates 3 circles vertically upwards;
(3) Rotate the indicator shell to make the long engraved line between C and B align with the big pointer;
(4) Pull the loading handle, apply the main test force, and the large pointer of the indicator rotates counterclockwise;
(5) When the rotation of the indicator needle stops, the unloading handle can be pushed back to remove the main test force;
(6) Reading from the corresponding scale on the indicator;
(7) Turn the handwheel to lower the test piece, then move the test piece, and carry out a new test according to the above steps (2)-(6);
(8) After the test, cover the machine with a dust cover.
Machine Certificate:
Business license Fame Certificates Wall
Factory environment area:
Company outdoor view Reception
Sales Team and Technicial Team:
Exhibition:
Product Tags:
|
|
HR-150A Hardness Tester Metal Hardness Tester Heat Treatment Hardness Tester Images
|
